643.ECONOMY AND POWER TUNING AN IC ENGINE FOR LOWER CO2 FOOTPRINT
DOI:
https://doi.org/10.55302/MESJ21391-2643033mKeywords:
free surface flow, computational fluid dynamics, Pelton turbine, Lattice Boltzmann MethodAbstract
Computational fluid dynamics (CFD) has become an indispensable tool in the development and optimization of various machines and devices in the last decade. In most cases, researchers deal with single-phase flows and internal flows where all externally wetted walls are defined. In some cases, it is also necessary to analyze multiphase flow and free-surface flow. Using classical numerical methods such as the finite element method (FEM) or the finite volume method (FVM), the results are highly dependent on the size and quality of the computational grids. Particular attention should be paid to the conditions at the boundary between the individual phases of the fluid. In most cases, it is necessary to consider non-stationary conditions and the necessity of using non-stationary numerical methods. All the above properties of multiphase flows and their consequences in performing numerical analyses lead us to very long computational times and consequently the use of very powerful computers. Industry often needs results in a relatively fast time therefore many simplifications need to be considered. Recently a new approach for numerical simulations of multiphase and free-surface flows based on the Lattice Boltzmann method (LBM) started to be used. The method is very useful especially for development of small-scale hydraulic turbines, where the expense for development process is usually very limited. In this paper, some examples of the use of LBM in the calculation of free-surface flows and compare the results using classical CFD methods have been presented.References
ACEA: Fuel Types of New Trucks.European Automobile Manufacturers Association(2020).Available at: https://www.acea.auto/fuel-cv/fuel-types-of-new-trucks-diesel-9 6-5-electric-0-4-alternative-fuels-2-9-market-share-in-2020/
Preston, B.:EVs Offer Big Savings Over Traditional Gas-Powered Cars.Consumer Reports(2020). Available at: https://www.consumerreports.org/hybrids-evs/evs-offer-big-savings-over-traditional-gas-powered-cars/
EERE:Reducing Pollution with Electric Vehicles.Office of Energy Efficiency & Renewable Energy(2020). Avai-lable at: https://www.energy.gov/eere/electricvehicles/re-ducing-pollution-electric-vehicles
Delasalle, F., Erdenesanaa, D.:Planes, Trains and (Big) Automobiles: How Heavy Transport Can Reduce Emis-sions and Save Money, 2019.World Resources Institute. Available at: https://www.wri.org/blog/2019/07/planes-trains-and-big-automobiles-how-heavy-transport-can-reduce-emissions-and-save
Teixeira, P. R., De Freitas,S. R., Correia,F. W., Manzi, A. O.:MOVEIM v1.0: Development of a bottom-up motor ve-hicular emission inventories for the urban area of manaus in central Amazon rainforest. Geoscientific Model Devel-opment 1–21(2018).
Hooftman, N.:A review of the European passenger car regulations –Real driving emissions vs local air quality. Renewable Sustainable Energy Rev. 86(2018).
Michalek,J. J., Chester,M., Jaramillo,P., SamarasC., Shiau,C-S. N., LaveL.B.:Valuation of plug-in vehicle life-cycle air emissions and oil displacement benefits. Proceedings of the National Academy of Sciences of the Economy and power tuning an ICengine for lower CO2footprint39Маш. инж. науч. спис.39(1–2), 33–46(2021)United States of America.PNAS October 4, 2011,108(40) 16554–16558.https://doi.org/10.1073/pn as.1104 473108
Tessum,C. W., Hill,J. D., Marshall,J. D.:Life cycle air quality impacts of conventional and alternative light-duty transportation in the UnitedStates. Proceedings of the National Academy of Sciences of the United States of America.PNAS December 30, 2014,111 (52) 18490–18495; first published December 15, 2014.https://doi.org /10.1073/pnas.1406853111
EU:Directive 98/70/EC of the European Parliament and of the Council of 13 October 1998 relating to the quality of petrol and diesel fuels and amending Council Directive 93/12/EEC. Official Journal L 350, 28/12/1998,pp. 0058 –0068(1998). Available at: http://publications.europa.eu/resource/cellar/9cdbfc9b-d8 14-4e9e-b05d-49dbb7c97ba1.0008.01/DOC_1
Giakoumis,E.:Diesel and spark ignition engines emissi-ons and after-treatment control: Research and Advance-ments. Energies, 10(11), 1882(2017).https://doi.org/10.33 90/en10111882
Nekooei,M., Koto.J.: A simple fuzzy-logicdiagnosis sys-tem for control of internal combustion engines. Jurnal Tek-nologi. 74(5),pp. 121–124(2015).DOI: 10.11113/jt.v74.4652
Simani,S., Bonfè,M.:Fuzzy modelling and control of the air system of a diesel engine.Advances in Fuzzy Systems.Volume 2009|Article ID 450259.https://doi.org/ 10.1155/2009/450259
Wong,P. K., Tam, L.M., Li,K.:Automotive engine power performance tuning under numerical and nominal data. Control Engineering Practice. 20(3),pp. 300–314(2012).DOI:10.1016/j.conengprac.2011.11.006.
Singh,J., Perisamy,C.:Innovation in cohesive stock ECU Tuning And Turbocharging(2009).International Journal of Innovative Technology and Research.4. pp. 5252–5255(2016).
ACEA:Average age of the EU vehicle fleet, by country. European Automobile Manufacturers Association(2021) Available at: https://www.acea.auto/figure/average-age-of-eu-vehicle-fleet-by-country/
Tutak,W., Jamrozik, A.,BereczkyA.:Effects of injection timing of diesel fuel on performance and emission of dual fuel diesel engine powered by diesel/E85 fuels.Transport. 33. pp. 633–646(2018). DOI:10.3846/transport.2018.1572
Ahmed,S. A., Zhou,S., Zhu,Y., Feng,Y., Malik, A., Ahmad, N.:Article influence of injection timing on perfor-mance and exhaust emission of CIengine fuelled with butanol-diesel using a 1D GT-power model. Processe.7(5), 299(2019).https://doi.org/10.3390/pr7050299
Ministry of Interior:Rulebook for the technical inspection of vehicles. Official Gazette of the Republic of North Macedonia. Number 81/2010 (in Macedonian)
