Ostrić, D. (2009): Dizalice, Univerzitet u Beogradu, Ma-šinski fakultet.

Јакимовска, К. (2021): Машини за цикличен транс-порт, Универзитет „Св. Кирил и Методиј“ во Скопје, Машински факултет – Скопје.

Институт за стандардизација на Република Македо-нија. (2015): МКС EN 13001-1: Кранови – Општ ди-зајн. – Дел 1: Општи принципи. ИСРМ

Hoffmann, K., Krenn, E., Stanker, G. (2004): Förder-technik: Maschinensätze, Fördermittel, Tragkonstruktio¬nen, Logistik (5th ed.), Vol. 2. Oldenbourg.

Hoffmann, K., Krenn, E., Stanker, G. (2012): Förder-technik 1: Bauelemente, Konstruktion, Berechnung. Vul¬kan-Verlag GmbH.

Seeßelberg, C. (2016): Kranbahnen: Bemessung und kon¬struktive Gestaltung nach Eurocode (5th ed.). DIN Media.

Dong, Q., Xu, G., & Ren, H. (2015): Risk assessment of remanufacturing arm structure for crane based on potential failure mode. Journal of Mechanical Science and Technol¬ogy, 29 (12), 5345–5357.

Omidvar, M., Nirumand, F. (2017): Risk assessment us-ing FMEA method and on the basis of MCDM, fuzzy logic and Grey theory: A case study of overhead cranes. Journal of¬Health & Safety at Work, 7 (1). http://jhsw.tums.ac.ir/article-1-5591-en.html

Masullo, M., Toma, R. A., Pascale, A., Maffei, L., Rug-giero, G. (2020, October): Effects of noise on overhead crane operators performances under mental fatigue, in a virtual reality crane simulator. In: INTER-NOISE and NOISE-CON Congress and Con¬ference Proceedings, Vol. 261, No. 4, pp. 2946–2954. Institute of Noise Control En¬gineering.

Sharma, K. D., Srivastava, S. (2018): Failure mode and effect analysis (FMEA) implementation: a literature re-view. Journal of Advance Research in Aeronautics and Space Science, 5 (1), 1–17.

Strohmandl, J., Tomek, M., Vargová, S., Čujan, Z. (2019): The use of the FMEA method for the evaluation of failures in crawler cranes. In: MATEC Web of Conferences. Vol. 263, p. 01004. EDP Sciences.

Kulka, J., Mantic, M., Fedorko, G., Molnar, V. (2020): Failure analysis concerning causes of wear for bridge crane rails and wheels. Engineering Failure Analysis, 110, 104441. https://doi.org/10.1016/j.engfailanal.2020.104441

Liu, H. C., Chen, X. Q., You, J. X., Li, Z. (2020): A new integrated approach for risk evaluation and classification with dynamic expert weights. IEEE Transactions on Reli¬ability, 70(1), 163–174.

Mohammadi, H., Fazli, Z., Kaleh, H., Azimi, H. R., Mo¬radi Hanifi, S., Shafiee, N. (2021): Risk analysis and re¬liability assess¬ment of overhead cranes using fault tree analysis integrated with Markov chain and fuzzy Bayesian net¬works. Mathematical Prob¬lems in Engineering, Vol. 2021, pp 1–17, 6530541. https://doi.org/10.1155/2021/6530541

Lingard, H., Cooke, T., Zelic, G., Harley, J. (2021): A qualitative analysis of crane safety incident causation in the Australian construction industry. Safety Science, 133, 105028. https://doi.org/10.1016/j.ssci.2020.105028

Li, A. (2024): Risk assessment of crane operation hazards using modified FMEA approach with Z-number and set pair analysis. Heliyon, 10(9), https://doi.org/10.1016/j.heliyon.2024.e28603

Li, A. (2024): Human error risk prioritization in crane op-erations based on CPT and ICWGT. PloS ONE, 19 (2), e0297120. https://doi.org/10.1371/journal.pone.0297120

Faisal, R., Firda, H., Yassyir, M., Ice, T., Saifullah, A. (2025): Crawler crane failure cause analysis using fish-bone diagram, Pareto principle, and failure mode effect analysis: A comprehensive approach to minimize downtime and improve operational reliability. Journal of Inno¬vation and Technology, 4, 1–11. https://creativecommons.org/licenses/by/4.0/

Gašić, V. (2017): Osnove metalnih konstrukcija u mašino¬gradnji, Univerzitet u Beogradu, Mašinski fakultet.

Lee, H.-H. (2021): Finite Element Simulations with ANSYS Workbench 2021: Theory, applications, case studies. SDC Publications. ISBN-10: 1630574562

Kochmann, D. M. (2025): Introduction to Finite Element Analysis. ETH Zurich.

Давчев, Т. (2009) Надежност и одржување на технич-ките системи, НИП Студентски збор, Скопје

Zhang, D. P., Cheng, W. M., Wang, B. (2017): Varia-tional analysis of mid-span deflection of gantry cranes. Journal of Central South University, 24(11), 2705–2716.

Sakiev, D. (2023): Design and manufacturing of the lifting beam for the overhead crane with 5T capacity.

Ahmid, A., Le, V. N., Dao, T. M. (2017): An optimiza-tion procedure for overhead gantry crane exposed to buck¬ling and yield criteria. IRA International Journal of Tech¬nology and Engineering, 8, 28–38.

Haas, T. N. (2007): Numerical (FEA) evaluation of crane end buffer impact forces (Doctoral dissertation), Stellen¬bosch, University of Stellenbosch.

Ling, Z., Wang, M., Xia, J., Wang, S., Guo, X. (2018): Stress analysis for the critical metal structure of bridge crane. In: IOP Conference Series: Earth and Environ-mental Science, Vol. 108, No. 2, p. 022056). IOP Publish-ing. DOI: https://doi.org/10.1088/1755-1315/108/2/022056

Hyla, P. (2019): Overhead travelling crane construction deflection measurements with telematic approach. Journal of KONES, Powertrain and Transport, Vol. 26, No. 3. DOI: 10.2478/kones-2019-0057

Consolazio, G. R., Cowan, D. R. (2005): Numerically effi¬cient dynamic analysis of barge collisions with bridge piers. Journal of Structural Engineering, 131 (8), 1256-1266, https://doi.org/10.1061/(ASCE)0733-9445(2005)131:8(1256)

Moskvichev, V. V., Chaban, E. A. (2019): Analysis of propagation of fatigue cracks in crane girders. Inorganic Materials, 55 (15), 1496–1502. DOI: https://doi.org/10.1134/S0020168519150123

Dong, Q., He, B., Qi, Q., Xu, G. (2021): Real‐time pre-diction method of fatigue life of bridge crane structure based on digital twin. Fatigue & Fracture of Engineering Materials & Structures, 44 (9), 2280–2306. https://doi.org/10.1111/ffe.13489

Wang, Z., Ran, Y., Yu, H., Jin, C., Zhang, G. (2021): Failure mode and effects analysis using function–motion–action decom¬position method and integrated risk priority number for mechatronic products: FMEA using FMA de¬composition method and IRPN for MPs. Quality and Reli-ability Engineering International, 37 (6), 2875–2899. https://doi.org/10.1002/qre.2895